Hot selling 60cbm 3 axles bulk flour transport tanker truck semi trailer
Transportation media:
Bulk feed, flour, wheat and corn, petroleum resin particles, sawdust powder, silicon powder, urea particles, activated carbon, aluminum ash alumina powder, Formosa particles and other low-density powder grain materials
Product features:
<Greater capacity>
Tank 60 square large capacity, to meet the needs of various feed transportation, the partition is closed, a variety of feed can be shipped at the same time, master the Dorado to earn "money" ability!
<Driving safety>
Using multi-cone combination, the tank body center of gravity is lower, of course safer, for you to protect peace!
<Efficient and less waste>
Large angle cone structure, fast material flow; unique fluidized device makes unloading fast and less surplus, is a good helper for you fast and save!
<Stable without blocking material>
The bottom discharging structure adopts the overall bending process, configured anti-blocking device, observation window, the material does not block the pipe, no residue, can also monitor the discharging state at any time, "particles to the warehouse", do not block not all want!
<Quality assurance>
Food grade screw air compressor unit, equipped with special cooling device, large gas volume, stable airflow, low exhaust temperature, to ensure that the feed quality is not affected, temperature control product has a trick!
PRODUCT PARAMETERS:
| Vehicle parameters |
Vehicle name |
Low-density powder particle material transport semi-trailer |
| Overall dimensions (length, width and height (mm) |
12950*2550*3980 |
| Preparation mass (kg) |
9500 |
| Configuration of tank |
volume |
60 before independent unloading (can be customized according to the demand) |
| Tank material |
304 food-grade stainless steel |
| discharge duct |
Built-in steel wire rubber tube / 7 m long |
| Discharge pressure |
0.2MPA |
| External air source |
Aluminum alloy valve |
| discharge valve |
DN150 Pneumatic valve |
| Tank / head thickness (mm) |
3/4/5/6mm |
| Can cover |
Open the lid quickly |
| air compressor |
Screw air compressor |
| Diesel engine set |
4102/38KW |
| relief valve |
mechanical |
| Second help blow |
3 Blowers |
| Bottom rack configuration |
tyre |
12R22.5 12PR 12 vacuum wire tires |
| number of axles |
3 Axis |
| brake assembly |
Automatic adjustment arm / 16T brake pads |
| Traction pin |
90# |
| discharge nozzle |
Visual unloading |
| wheel base (mm) |
8070+1310+1310 |
| ABS |
Front and rear two axes |
| axle |
13T |
| landing leg |
28T |
| Install the attachment |
alufer |
operation declaration:
1 File:
Before charging, the pressure relief valve must be opened to ensure that there is no pressure in the tank. Then open the charging port of each warehouse for loading.
2 Ups:
When pumping, open all the intake valves and AIDS, close all the feed ports, the butterfly valve, the secondary blow ball valve, the external air source ball valve, and control the throttle remotely to ensure that the tachometer value is within the range of 900-1000 r/min.(Note: When taking the external gas source, open the gas source ball valve outside the tank, dock with the external gas source port, and press the external gas source valve.)
3 Discharge:
When discharge pressure 0.15 mpa, open the secondary blow valve, request first 1 warehouse and 5 warehouse, and then play 234 warehouse, in turn to open the warehouse discharge valve, discharge, (note: 5 warehouse can not be discharged at the same time, require each warehouse after open another warehouse discharge, tail after a material observation window, can observe the unloading status of each warehouse).
4 Secondary unloading:
When the pressure drops to 0.12map, close the secondary blow valve and discharge valve. When the pressure rises to 0.15 mpa, open the secondary blow valve and discharge valve again for discharge (after about 2 minutes of unloading, gradually close the secondary blow valve and open to the maximum half).
5 Clearance:
After filling all silos, open the discharge butterfly valve of each warehouse for clearance. When the pressure drops to 0.05-0.08mpa, open the pressure relief valve, close the air compressor, and finish the feeding.
Advantages of vehicle-mounted screw air compressor:
1. Light weight: dead weight 128 kg
2. Three years of super long warranty, only change but not repair.
3. Stable air intake, fast speed, ash speed 35 square 20-25 minutes.
4. Low fuel consumption, low noise, and the idle speed state of the main car can meet the power requirements of the air compressor.
5. The screw air compressor resistance is small, using gear fitting technology, almost zero resistance, effectively reduce the wear of the gearbox.
6. Low temperature, the normal air compressor operating temperature is 140ºC -150ºC, and the screw air compressor is only 110ºC -120ºC.
7. The intake humidity is low, which reduces the humidity by 40% -50% than the conventional air compressor.
8. Low maintenance cost, replace the filter element once a year, and only need to replace the oil twice a year.
9. Small volume, does not occupy the upper space of the host, can realize bulk, bag swinging transportation.
Bulk powder Trailer series products recommended
QINGDAO PURPLE INTERNATIONAL TRADE CO., LTD is a comprehensive trading company, located in Qingdao, with convenient air, sea and land transportation.
We are an international supplier of various types of heavy and special trucks, semi-trailers and spare parts. We also specialize in the supply of construction products including; construction machinery and equipment, building materials and steel structures.
The company is equipped with a group of excellent and responsible marketing personnel, high-level and high-quality technical engineers and service teams, as well as domestic regional channel partners, who can respond to the regular or special business requirements of customers in various industries in a timely manner, and provide high-quality and durable products and solutions that best meet the needs of customers; at the same time, it also provides customers with sufficient technical support and perfect after-sales service Business. We adhere to the principle of "reputation first, customer first", always put the interests of customers first, and wholeheartedly provide our customers with the best products and services.
We are willing to work together with you in all walks of life to seek common development and create a better future.
Our main products
Quality Control
1.Q: What are your advantages?
A: We have over 15 years of export experience. Our products have been exported to more than 60 countries and regions including Africa, the Middle East, Southeast Asia, and South America. We have a professional after-sales service and technical team to address your concerns promptly.
2.Q: What are the payment methods available?
A: After the contract is signed, a 30% prepayment is required, and the remaining 70% will be paid before shipment. We accept payment via T/T and L/C.
3.Q: Can you customize trucks according to specific requirements?
A: Yes, we provide customization options for our trucks to meet specific needs such as load capacity, engine specifications, body design, and other features.
4.Q: What makes your heavy trucks stand out from others?
A: Our heavy trucks are built to withstand tough conditions and heavy loads. They incorporate advanced engineering, durable components, and rigorous testing to ensure optimal performance and longevity.
5.Q: Do you provide after-sales support and warranty for your trucks?
A: Yes, we offer comprehensive after-sales support, including warranty coverage and maintenance services, to ensure customer satisfaction and the long-term reliability of our trucks.
6.Q: How do I place an order for your trucks?
A: To place an order, contact our sales team through the Made-in-China platform or our official website. Our sales representatives will assist you with product selection, customization options, pricing, and shipping arrangements.
7.Q: What are the delivery lead times for your trucks?
A: Delivery lead times may vary depending on order volume, customization requirements, and shipping logistics. Our sales team will provide an estimated delivery timeline based on your order details.
8.Q: Do you ship internationally?
A: Yes, we ship our trucks internationally to customers worldwide. We work with reliable logistics partners to ensure safe and timely delivery to your desired location.
Audited Supplier 
){kind=link}